summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dml2
AgeCommit message (Collapse)Author
2024-12-02drm/amd/display: Add hblank borrowing supportChris Park
[WHY] Some DSC timing failed at bandwidth validation due to hactive can't be evenly divided on each ODM segment. [HOW] Borrow from hblank to increase hactive to support these timing. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Limit VTotal range to max hw cap minus fpDillon Varone
[WHY & HOW] Hardware does not support the VTotal to be between fp2 lines of the maximum possible VTotal, so add a capability flag to track it and apply where necessary. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-12-02drm/amd/display: Correct prefetch calculationLo-an Chen
[WHY] The minimum value of the dst_y_prefetch_equ was not correct in prefetch calculation whice causes OPTC underflow. [HOW] Add the min operation of dst_y_prefetch_equ in prefetch calculation. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Lo-an Chen <lo-an.chen@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: Enable Request rate limiter during C-State on dcn401Dillon Varone
[WHY] When C-State entry is requested, the rate limiter will be disabled which can result in high contention in the DCHUB return path. [HOW] Enable the rate limiter during C-state requests to prevent contention. Cc: stable@vger.kernel.org # 6.11+ Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-20drm/amd/display: update pipe selection policy to check head pipeYihan Zhu
[Why] No check on head pipe during the dml to dc hw mapping will allow illegal pipe usage. This will result in a wrong pipe topology to cause mpcc tree totally mess up then cause a display hang. [How] Avoid to use the pipe is head in all check and avoid ODM slice during preferred pipe check. Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-11drm/amd/display: Require minimum VBlank size for stutter optimizationDillon Varone
If the nominal VBlank is too small, optimizing for stutter can cause the prefetch bandwidth to increase drasticaly, resulting in higher clock and power requirements. Only optimize if it is >3x the stutter latency. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Fix underflow when playing 8K video in full screen modeLeo Ma
[Why&How] Flickering observed while playing 8k HEVC-10 bit video in full screen mode with black border. We didn't support this case for subvp. Make change to the existing check to disable subvp for this corner case. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28Revert "drm/amd/display: update DML2 policy ↵Ovidiu Bunea
EnhancedPrefetchScheduleAccelerationFinal DCN35" This reverts commit 9dad21f910fc ("drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35") [why & how] The offending commit exposes a hang with lid close/open behavior. Both issues seem to be related to ODM 2:1 mode switching, so there is another issue generic to that sequence that needs to be investigated. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Add P-State Stall Timeout Recovery Support for dcn401Dillon Varone
[WHY&HOW] Adds support for P-State stall timeout detection in DCHUBBUB. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: update fullscreen status to SPLSamson Tam
[Why] Current fullscreen check in SPL using dm_helpers is out-of-sync with dc state. This causes an issue during minimal transition where we pick an invalid intermediate state because the pre and post fullscreen status are different. [How] Add sharpening_required flag to dc_stream_state. Use this flag to indicate if we are in fullscreen or not. Propagate flag to SPL for fullscreen status. Remove workaround in DML Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-22drm/amd/display: Recalculate SubVP Phantom VBlank End in dml21Dillon Varone
[WHY] The phantom stream timing is copied from the main stream as most parameters are identical, however some need to be recalculated. Currently VBlank End is not recalculated and copied from the main incorrectly. [HOW] Recalculate VBlank End for phantom stream timing. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-15drm/amd/display: disable dynamic ODM when sharpness is enabledSamson Tam
[Why & How] Disable dynamic ODM when sharpness is enabled Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-15drm/amd/display: Remove useless assignmentsAlex Hung
[WHAT & HOW] "split_pipe" are assigned to test_pipe and then immediately are updated to other values. The same also applies to "status" as well. Similarly, "id", "dwb" and "unused_dpps" are assigned but the functions immediately return, and thus they have no effects. As a results, the assignments removed. This fixes 5 UNUSED_VALUE issues reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Allow Latency Increase For Last StrategyAustin Zheng
[Why] Playing 1080p video on 4k60 timing uses UCLK DPM5 and mode support determines that p-state switching is not supported. [How] Allow DML to increase latency as the last strategy so strategies such as VBlank p-state switching may become possible Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Assign socclk in dmlSridevi Arvindekar
Assign socclk_khz value from dcn4x. Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com> Signed-off-by: Sridevi Arvindekar <sarvinde@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Revert commit Update Interface to Check UCLK DPMAustin Zheng
This reverts commit b8d046985c2dc41a0e264a391da4606099f8d44f. Reverting as regression discovered on certain systems and golden values need to updated. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-01drm/amd/display: Update Interface to Check UCLK DPMAustin Zheng
[Why] Videos using YUV420 format may result in high power being used. Disabling MPO may result in lower power usage. Update interface that can be used to check power profile of a dc_state. [How] Allow pstate switching in VBlank as last entry in strategy candidates. Add helper functions that can be used to determine power level: -get power profile after a dc_state has undergone full validation Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-01drm/amd/display: update DML2 policy ↵Yihan Zhu
EnhancedPrefetchScheduleAccelerationFinal DCN35 [WHY & HOW] Mismatch in DCN35 DML2 cause bw validation failed to acquire unexpected DPP pipe to cause grey screen and system hang. Remove EnhancedPrefetchScheduleAccelerationFinal value override to match HW spec. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-26drm/amd/display: Fix unnecessary cast warnings from checkpatchRohit Chavan
This patch addresses warnings produced by the checkpatch script related to unnecessary casts that could potentially hide bugs. The specific warnings are as follows: - Warning at drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:16 - Warning at drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:20 - Warning at drivers/gpu/drm/amd/display/dc/dml2/dml21/dml21_wrapper.c:30 Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rohit Chavan <roheetchavan@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Fix underflow when setting underscan on DCN401Aurabindo Pillai
[WHY & HOW] When underscan is set through xrandr, it causes the stream destination rect to change in a way it becomes complicated to handle the calculations for subvp. Since this is a corner case, disable subvp when underscan is set. Fix the existing check that is supposed to catch this corner case by adding a check based on the parameters in the stream Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Dillon Varone <dillon.varone@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Block timing sync for different output formats in pmoDillon Varone
[WHY & HOW] If the output format is different for HDMI TMDS signals, they are not synchronizable. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: fix typo in the commentYan Zhen
Correctly spelled comments make it easier for the reader to understand the code. Replace 'maxium' with 'maximum' in the comment & replace 'diffculty' with 'difficulty' in the comment & replace 'suppluy' with 'supply' in the comment & replace 'Congiuration' with 'Configuration' in the comment & replace 'eanbled' with 'enabled' in the comment. Signed-off-by: Yan Zhen <yanzhen@vivo.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: Block timing sync for different signals in PMODillon Varone
PMO assumes that like timings can be synchronized, but DC only allows this if the signal types match. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: fix graphics hang in multi-display mst caseGabe Teeger
[what] Graphics hang observed with 3 displays connected to DP2.0 mst dock. [why] There's a mismatch in dml and dc between the assignments of hpo link encoders. [how] Add a new array in dml that tracks the current mapping of HPO stream encoders to HPO link encoders in dc. Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: re-enable Dynamic ODM policySamson Tam
[Why] Previous disable ODM policy due to underflow issue with sharpener. Issue is resolved after updating sharpening policy to apply to both windowed and fullscreen video [How] Remove sharpness check disabling Dynamic ODM policy Reviewed-by: Martin Leung <martin.leung@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: add back quality EASF and ISHARP and dc dependency changesSamson Tam
[Why] Addressed previous issues with quality changes and new issues due to rolling back quality changes. [How] This reverts commit f9e6759888866748f31b6b6c2142a481d587f51f, fixes merge conflicts, and fixed some formatting errors. Store current sharpness level for each pregen table to minimize calculating sharpness table every time. Disable dynamic ODM when sharpness is enabled. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Resolve Coverity IssuesDaniel Sa
[WHY] Remove coverity issues that were originally ignored. [HOW] Ran coverity locally on driver, used output report to find existing coverity issues, resolved them Reviewed-by: Nicholas Choi <nicholas.choi@amd.com> Signed-off-by: Daniel Sa <Daniel.Sa@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Fix MS/MP mismatches in dml21 for dcn401Dillon Varone
[WHY] Prefetch calculations did not guarantee that bandwidth required in mode support was less than mode programming which can cause failures. [HOW] Fix bandwidth calculations to assume fixed times for OTO schedule, and choose which schedule to use based on time to fetch pixel data. Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-23drm/amd/display: Make core_dcn4_ip_caps_base staticJinjie Ruan
The sparse tool complains as follows: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4.c:12:28: warning: symbol 'core_dcn4_ip_caps_base' was not declared. Should it be static? This symbol is not used outside of dcn35_hubp.c, so marks it static. And do not want to change it, so mark it const. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-23drm/amd/display: Make core_dcn4_g6_temp_read_blackout_table staticJinjie Ruan
The sparse tool complains as follows: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:6853:56: warning: symbol 'core_dcn4_g6_temp_read_blackout_table' was not declared. Should it be static? This symbol is not used outside of dml2_core_dcn4_calcs.c, so marks it static. And not want to change it, so mark it const. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: DML2.1 Reintegration for Various FixesAustin Zheng
[Why and How] DML2.1 reintegration for several fixes and updates to the DML code. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Roman Li <roman.li@amd Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: apply vmin optimization even if it doesn't reach vmin levelWenjing Liu
[why] Based on power measurement result, in most cases when display clock is higher than Vmin display clock, lowering display clock using dynamic ODM will improve overall power consumption by 0 to 4 watts even if we can't reach Vmin. [how] Allow vmin optimization applied even if dispclk can't reach Vmin. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: fix minor coding errors where dml21 phase 5 uses wrong ↵Wenjing Liu
variables [why & how] There is a coding error which causes incorrect variables to be assigned in DML21 phase 5. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: remove extraneous ; after statementsColin Ian King
There are a several statements with two following semicolons, replace these with just one semicolon. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Add DML2.1 option to disable DRR clamped P-State StrategiesDillon Varone
[WHY & HOW] When DRR is active with variable refresh rate, add the ability to block DRR clamped P-State strategies (such as SubVP). Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Force enable 3DLUT DMA check for dcn401 in DMLDillon Varone
[WHY] Currently TR0 (trip 0) is not properly budgeting for urgent latency in DML2.1. This results in overly aggressive prefetch schedules that are vulnerable to request return jitter, resulting in severe underflow at the start of the frame. [HOW] Forcing 3DLUT DMA check to enable causes urgent latency to be budgeted properly into the prefetch schedule, avoiding the vulnerability. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Assume 32 bpp cursor in DML21Joshua Aberback
[Why] Cursor size can change dynamically at runtime without re-validation, so DML should calculate with the max size cursor to cover all cases. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Disable SubVP if Hardware Rotation is UsedAustin Zheng
[Why and How] SubVP is not supported when hardware rotation is being used Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: fix a UBSAN warning in DML2.1Aurabindo Pillai
When programming phantom pipe, since cursor_width is explicity set to 0, this causes calculation logic to trigger overflow for an unsigned int triggering the kernel's UBSAN check as below: [ 40.962845] UBSAN: shift-out-of-bounds in /tmp/amd.EfpumTkO/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3312:34 [ 40.962849] shift exponent 4294967170 is too large for 32-bit type 'unsigned int' [ 40.962852] CPU: 1 PID: 1670 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic #41~22.04.2-Ubuntu [ 40.962854] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F21 01/10/2024 [ 40.962856] Call Trace: [ 40.962857] <TASK> [ 40.962860] dump_stack_lvl+0x48/0x70 [ 40.962870] dump_stack+0x10/0x20 [ 40.962872] __ubsan_handle_shift_out_of_bounds+0x1ac/0x360 [ 40.962878] calculate_cursor_req_attributes.cold+0x1b/0x28 [amdgpu] [ 40.963099] dml_core_mode_support+0x6b91/0x16bc0 [amdgpu] [ 40.963327] ? srso_alias_return_thunk+0x5/0x7f [ 40.963331] ? CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport+0x18b8/0x2790 [amdgpu] [ 40.963534] ? srso_alias_return_thunk+0x5/0x7f [ 40.963536] ? dml_core_mode_support+0xb3db/0x16bc0 [amdgpu] [ 40.963730] dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.963906] ? srso_alias_return_thunk+0x5/0x7f [ 40.963909] ? dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu] [ 40.964078] core_dcn4_mode_support+0x72/0xbf0 [amdgpu] [ 40.964247] dml2_top_optimization_perform_optimization_phase+0x1d3/0x2a0 [amdgpu] [ 40.964420] dml2_build_mode_programming+0x23d/0x750 [amdgpu] [ 40.964587] dml21_validate+0x274/0x770 [amdgpu] [ 40.964761] ? srso_alias_return_thunk+0x5/0x7f [ 40.964763] ? resource_append_dpp_pipes_for_plane_composition+0x27c/0x3b0 [amdgpu] [ 40.964942] dml2_validate+0x504/0x750 [amdgpu] [ 40.965117] ? dml21_copy+0x95/0xb0 [amdgpu] [ 40.965291] ? srso_alias_return_thunk+0x5/0x7f [ 40.965295] dcn401_validate_bandwidth+0x4e/0x70 [amdgpu] [ 40.965491] update_planes_and_stream_state+0x38d/0x5c0 [amdgpu] [ 40.965672] update_planes_and_stream_v3+0x52/0x1e0 [amdgpu] [ 40.965845] ? srso_alias_return_thunk+0x5/0x7f [ 40.965849] dc_update_planes_and_stream+0x71/0xb0 [amdgpu] Fix this by adding a guard for checking cursor width before triggering the size calculation. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Cleanup dml2 and dc/resource MakefileRodrigo Siqueira
Remove some useless lines from DC Makefiles. Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Check UnboundedRequestEnabled's valueAlex Hung
CalculateSwathAndDETConfiguration_params_st's UnboundedRequestEnabled is a pointer (i.e. dml_bool_t *UnboundedRequestEnabled), and thus p->UnboundedRequestEnabled checks its address, not bool value. To check value, *p->UnboundedRequestEnabled is used instead. This fixes 1 REVERSE_INULL issue reported by Coverity. Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-27drm/amd/display: Use gpuvm_min_page_size_kbytes for DML2 surfacesNicholas Kazlauskas
[Why] It's currently hard coded to 256 when it should be using the SOC provided values. This can result in corruption with linear surfaces where we prefetch more PTE than the buffer can hold. [How] Update the min page size correctly for the plane. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-27drm/amd/display: Check null values from functionsAlex Hung
Functions get_per_method_common_meta and get_expanded_strategy_list can return null and thus it is necessary to check their returned values before dereferencing. This fixes 3 NULL_RETURNS issues reported by Coverity. Signed-off-by: Alex Hung <alex.hung@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-27drm/amd/display: Add option to disable unbounded req in DML21Alvin Lee
Use debug option for disabling unbounded req in DML21 Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Austin Zheng <Austin.Zheng@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-27drm/amd/display: Request 0MHz dispclk for zero display caseNicholas Kazlauskas
[Why] If we aren't entering RCG/IPS2 or CLKSTOP is not supported by PMFW then we should be requesting a dispclk value of 0MHz to PMFW. Currenly we run at max clock since there's an assumption in APU clock table formulation where we can run at any DISPCLK at any state so the real clock value ends up as 1200Mhz - the maximum. [How] Set to 0 instead of the minimum value in the state array. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Duncan Ma <duncan.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-27drm/amd/display: roll back quality EASF and ISHARP and dc dependency changesSamson Tam
[Why] Seeing several regressions related to quality EASF and ISHARP changes and removing dc dependency changes. [How] Roll back SPL changes Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-25drm/amd/display: remove unneeded semicolonJiapeng Chong
No functional modification involved. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:481:2-3: Unneeded semicolon. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3783:168-169: Unneeded semicolon. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3782:166-167: Unneeded semicolon. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9575 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-25drm/amd/display: use swap() in sort()Jiapeng Chong
Use existing swap() function rather than duplicating its implementation. ./drivers/gpu/drm/amd/display/dc/dml2/dml21/src/dml2_pmo/dml2_pmo_dcn3.c:17:29-30: WARNING opportunity for swap(). Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9573 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-25drm/amd/display: Reapply 2fde4fdddc1fNathan Chancellor
Commit 2563391e57b5 ("drm/amd/display: DML2.1 resynchronization") blew away the compiler warning fix from commit 2fde4fdddc1f ("drm/amd/display: Avoid -Wenum-float-conversion in add_margin_and_round_to_dfs_grainularity()"), causing the warning to reappear. drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_dpmm/dml2_dpmm_dcn4.c:183:58: error: arithmetic between enumeration type 'enum dentist_divider_range' and floating-point type 'double' [-Werror,-Wenum-float-conversion] 183 | divider = (unsigned int)(DFS_DIVIDER_RANGE_SCALE_FACTOR * (vco_freq_khz / clock_khz)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated. Apply the fix again to resolve the warning. Fixes: 2563391e57b5 ("drm/amd/display: DML2.1 resynchronization") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-25drm/amd/display: Fix spelling mistake "tolarance" -> "tolerance"Colin Ian King
There is a spelling mistake in a dml2_printf message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>