summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/inc/hw/link_encoder.h
AgeCommit message (Collapse)Author
2024-04-26drm/amd/display: Clean up code in DCRodrigo Siqueira
This commit removes some unnecessary code and makes the required adjustments to replace other parts of the code with a short option. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-28drm/amd/display: merge dc_link.h into dc.h and dc_types.hWenjing Liu
[why] Remove the need to include dc_link.h separately. dc.h should contain everything needed on DM side. [How] Merge dc_link.h into dc.h and dc_types.h so DM only needs to include dc.h to use all link public functions. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-07drm/amd/display: Add PSR-SU-RC support in DCDavid Zhang
[Why] PSR-SU Rate Control - or PSR-SU-RC - enables PSR-SU panels to work with variable refresh rate to allow for more power savings. Lowering the refresh rate can increase PSR residency by expanding the eDP main link shut down duration. It can also lower panel power consumption. There is a complication with PSR, since the eDP main link can be shut down. Therefore, the timing controller (TCON) on the eDP sink nees to be able to scan out its remote buffer independent of the main link. To allow the eDP source to specify the sink's refresh rate while the link is off, vendor-specific DPCD registers are used. This allows the eDP source to then "Rate Control" the panel during PSR active. [How] Add DC support to communicate with PSR-SU-RC supported eDP sinks. The sink will need to know the desired VTotal during PSR active. This change only adds support to DC, support in amdgpu_dm is still pending to enable this fully. Signed-off-by: David Zhang <dingchen.zhang@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: program PSR2 DPCD ConfigurationDavid Zhang
[Why] To support PSR2 Source DPCD configuration [How] Update the PSR2 Source DPCD settings while the PSR2 enabled Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Fix USBC link creationDillon Varone
[Description] Add USBC connector ID to align with new VBIOS parsing. Add seperate DCN321 link encoder due to different PHY version affecting DP ALT related registers. Signed-off-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: add set dp lane settings to link_hwssWenjing Liu
[why] Factor set dp lane settings to link_hwss. v2: fix statement with no effect warning (Alex) Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Drop DCN for DP2.x logicWenjing Liu
[Why & How] DCN guard is not necessary for DP2.x relevant logic. Drop them. v2: squash in fix for misplaced #endif (Alex) Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: support dynamic HPO DP link encoder allocationWenjing Liu
[why] When there are more DP2.0 RXs connected than the number HPO DP link encoders we have, we need to dynamically allocate HPO DP link encoder to the port that needs it. [how] Only allocate HPO DP link encoder when it is needed. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix dynamic encoder reassignmentJimmy Kizito
[Why] Incorrect encoder assignments were being used while applying a new state to hardware. (1) When committing a new state to hardware requires resetting the back-end, the encoder assignments of the current or old state should be used when disabling the back-end; and the encoder assignments for the next or new state should be used when re-enabling the back-end. (2) Link training on hot plug could take over an encoder already in use by another stream without first disabling it. [How] (1) Introduce a resource context 'link_enc_cfg_context' which includes: - a mode to indicate when transitioning from current to next state. - transient encoder assignments to use during this state transition. Update the encoder configuration interface to respond to queries about encoder assignment based on the mode of operation. (2) Check if an encoder is already in use before attempting to perform link training on hot plug. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Fix concurrent dynamic encoder assignmentJimmy Kizito
[Why] Trying to enable multiple displays simultaneously exposed shortcomings with the algorithm for dynamic link encoder assignment. The main problems were: - Assuming stream order remained constant across states would sometimes lead to invalid DIG encoder assignment. - Incorrect logic for deciding whether or not a DIG could support a stream would also sometimes lead to invalid DIG encoder assignment. - Changes in encoder assignment were wholesale while updating of the pipe backend is incremental. This would lead to the hardware state not matching the software state even with valid encoder assignments. [How] The following changes fix the identified problems. - Use stream pointer rather than stream index to track streams across states. - Fix DIG compatibility check by examining the link signal type rather than the stream signal type. - Modify assignment algorithm to make incremental updates so software and hardware states remain coherent. Additionally: - Add assertions and an encoder assignment validation function link_enc_cfg_validate() to detect potential problems with encoder assignment closer to their root cause. - Reduce the frequency with which the assignment algorithm is executed. It should not be necessary for fast state validation. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-01drm/amd/display: Add DP 2.0 BIOS and DMUB SupportFangzhi Zuo
Parse DP2 encoder caps and hpo instance from bios Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-01drm/amd/display: Add DP 2.0 HPO Link EncoderFangzhi Zuo
HW Blocks: +--------+ +-----+ +------+ | OPTC | | HDA | | HUBP | +--------+ +-----+ +------+ | | | | | | HPO ====|==========|========|==== | | v | | | +-----+ | | | | APG | | | | +-----+ | | | | | | v v v | +---------------------+ | | HPO Stream Encoder | | +---------------------+ | | | v | +--------------------+ | | HPO Link Encoder | v +--------------------+ [squash in warning fixes - Alex] Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-22drm/amdgpu/display: fold DRM_AMD_DC_DCN3_1 into DRM_AMD_DC_DCNAlex Deucher
No need for a separate flag now that DCN3.1 is not in bring up. Fold into DRM_AMD_DC_DCN like previous DCN IPs. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-04drm/amd/display: Add DCN3.1 DIONicholas Kazlauskas
Add support for the DIO (Display IO) block of DCN3.1 which controls legacy HDMI/DP stream/link encoding. HW Blocks: +--------+ +--------+ | DIO | | DCCG | +--------+ +--------+ Includes some updates to core logic for link encoder assignment and future support for new high bandwidth output. v2: squash in unused variable fix (Alex) Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Add dynamic link encoder selection.Jimmy Kizito
[Why] Some display endpoints may be programmably mapped to compatible link encoders. The assignment of link encoders to links has to be dynamic to accommodate the increased flexibility in comparison to conventional display endpoints. [How] - Add link encoder assignment tracking variables. - Execute link encoder assignment algorithm before enabling link and release link encoders from links once they are disabled. Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-26drm/amd/display: Define PSR ERROR Status bit VSC_SDPReza Amini
[why] So we can track VSC SDP errors from display [how] Define the bit, and use it in driver logic Signed-off-by: Reza Amini <Reza.Amini@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-05drm/amd/display: only include FEC overhead if both asic and display support FECWenjing Liu
[why] Some asics don't support FEC but FEC overhead is added into link bandwidth calculation by mistake. This causes certain timing cannot be validated. [how] Only include FEC overhead if both asic and display support FEC. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: Drop CONFIG_DRM_AMD_DC_DCN2_0 and DSC_SUPPORTEDBhawanpreet Lakha
[Why] DCN2 and DSC are stable enough to be build by default. So drop the flags. [How] Remove them using the unifdef tool. The following commands were executed in sequence: $ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';' $ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';' In addition: * Remove from kconfig, and replace any dependencies with DCN1_0. * Remove from any makefiles. * Fix and cleanup NV defninitions in dal_asic_id.h * Expand DCN1 ifdef to include DCN2 code in the following files: * clk_mgr/clk_mgr.c: dc_clk_mgr_create() * core/dc_resources.c: dc_create_resource_pool() * dce/dce_dmcu.c: dcn20_*lock_phy() * dce/dce_dmcu.c: dcn20_funcs * dce/dce_dmcu.c: dcn20_dmcu_create() * gpio/hw_factory.c: dal_hw_factory_init() * gpio/hw_translate.c: dal_hw_translate_init() Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: Add some hardware status in DTN log debugfsLeo (Hanghong) Ma
[Why] For debug purpose, we need to check the following hardware status in DTN log debugfs: 1.dpp & hubp clock enable; 2.crtc blank enable; 3.link phy status; [How] Add the upper information in the amdgpu_dm_dtn_log debugfs. For CRTC blanked status, since DCN2 and greater reports it on the OPP instead of OTG, we patch it in after calling optc1_read_otg_states. Ideally, this should be done in the DCN version specific function hooks. It has been left as a TODO item. Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-10drm/amd/display: check phy dpalt lane count configLewis Huang
[Why] Type-c PHY config is not align with dpcd lane count. When those values didn't match, it cause driver do link training with 4 lane but phy only can output 2 lane. The link trainig always fail. [How] 1. Modify get_max_link_cap function. According DPALT_DP4 to update max lane count. 2. Add dp_mst_verify_link_cap to handle MST case because we didn't call dp_mst_verify_link_cap for MST case. Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-23drm/amd/display: set av_mute in hw_init for HDMICharlene Liu
[Description] OS will reserve HW state in UEFI mode. Driver init_hw reset to RGB which caused HDMI green in YCbCr mode. read HW blank_color based on acc_mode. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-08-15drm/amd/display: Enable type C hotplugEric Yang
[Why and How] We want to change where timing is done for alt mode. Some of the commented out #ifs are needed for DCN20 so we enable them for that case. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-22drm/amd/display: Add DSC support for Navi (v2)Harry Wentland
Add support for DCN2 DSC (Display Stream Compression) HW Blocks: +--------++------+ +----------+ | HUBBUB || HUBP | <-- | MMHUBBUB | +--------++------+ +----------+ | ^ v | +--------+ +--------+ | DPP | | DWB | +--------+ +--------+ | v ^ +--------+ | | MPC | | +--------+ | | | v | +-------+ +-------+ | | OPP | <--> | DSC | | +-------+ +-------+ | | | v | +--------+ / | OPTC | -------------- +--------+ | v +--------+ +--------+ | DIO | | DCCG | +--------+ +--------+ v2: rebase (Alex) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-21drm/amd/display: Add DCN2 DIOHarry Wentland
Add support for the DIO (Display IO) block of DCN2, which entails our stream and link encoders. HW Blocks: +--------+ | DIO | +--------+ Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: block passive dongle EDID Emulation for USB-C portsSamson Tam
[Why] Emulating passive dongle on USB-C port causes issue on some asics. [How] Check for DP_IS_USB_C flag in bios parser and propagate it to encoder features flags. If DP_IS_USB_C flag is set and it is trying to emulate passive dongle, then return fail. Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-06drm/amd/display: interface to check if timing can be seamlessAnthony Koo
[Why] Need to figure out whether a timing we want to commit matches something that GOP already programmed, in which case we can decide to some optimizations [How] 1. Add way to check for DIG FE 2. Add way to check for matching OTG timing 3. Add way to check for matching pixel clock (if possible) - Currently only support DP for pixel clock, since it is easy to calc Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Add link encoder dp_ycbcr420_supported feature flagEric Bernstein
[Why] Need separate feature flag for DP 4:2:0 support, since existing flag is used for HDMI [How] Added dp_ycbcr420_supported to struct encoder_feature_support Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09drm/amd/display: clean up encoding checksEric Yang
[Why] All ASICS we support has YCbCr support, so the check is unnecessary, the currently logic in validate output also returns true all the time, so the unneccessary logic is removed Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amdgpu/display: add support for LVDS (v5)Alex Deucher
This adds support for LVDS displays. v2: add support for spread spectrum, sink detect v3: clean up enable_lvds_output v4: fix up link_detect v5: remove assert on 888 format Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105880 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-15drm/amd/display: Use dig enable to determine fast boot optimization.Yongqiang Sun
Linux doesn't know lid state, better to check dig enable value from register. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Pass signal directly to enable_tmds_outputHarry Wentland
This makes the check for HDMI and dual-link DVI a bit more straightforward. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-19BackMerge tag 'v4.15-rc4' into drm-nextDave Airlie
Linux 4.15-rc4 Daniel requested it to fix some messy conflicts.
2017-12-06drm/amd/display: Don't use dc_link in link_encoderAndrew Jiang
dc_link is at a higher level than link_encoder, and we only want higher-level components to be able to access lower-level ones, not the other way around. Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-04drm/amdgpu: add license to files where it was missingAlex Deucher
These files were missing it before. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-10-21drm/amd/display: Move power control from link encoder to hwsequencerAndrew Jiang
A recent commit moved the backlight control code along with the register defines, but did not move the power control code. This along with remnant fields in the dce110_link_enc_registers struct made it so that the code still compiled, but any attempts to access the LVTMA_PWRSEQ_STATE register led to reading from an address of 0. This patch corrects that. Also, rename blacklight_control to edp_backlight_control (Typo fix). Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-10-21drm/amd/display: moving backlight registers to hwsequencerYue Hin Lau
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: Block 6Ghz timing if SBIOS set HDMI_6G_en to 0Charlene Liu
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: Rename dc_stream to dc_stream_stateHarry Wentland
find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \ -o -name "*.cpp" -o -name "*.hpp" | \ xargs sed -i 's/struct dc_stream/struct dc_stream_state/g' find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \ -o -name "*.cpp" -o -name "*.hpp" | \ xargs sed -i 's/struct dc_stream_state_update/struct dc_stream_update/g' find -name Makefile -o -name Kconfig -o -name "*.c" -o -name "*.h" \ -o -name "*.cpp" -o -name "*.hpp" | \ xargs sed -i 's/struct dc_stream_state_status/struct dc_stream_status/g' Plus some manual changes Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: Roll core_stream into dc_streamLeo (Sunpeng) Li
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: Move stream validations into seperate function.Andrey Grodzovsky
Stateless streams validations (not require resource population) moved into hook to be called directly from DM. Call dc_validate_stream be before validate_with_context for non Linux APIs Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: Refactor to call set PSR wait loop in dce_dmcu instead of ↵Amy Zhang
dce_clocks Signed-off-by: Amy Zhang <Amy.Zhang@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: DMCU PSR RefactorAmy Zhang
- Move PSR programming from link encoder to dmcu Signed-off-by: Amy Zhang <Amy.Zhang@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: Move backlight from encoder to ABMAnthony Koo
Signed-off-by: Anthony Koo <anthony.koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: DMCU Compile and LoadAnthony Koo
Signed-off-by: Anthony Koo <anthony.koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: remove SIGNAL_TYPE_WIRELESSTony Cheng
Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/display: simplify link_encoderTony Cheng
- remove unnecessary feature flags - remove wireless and VGA validation Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-26drm/amd/dc: Add dc display driver (v2)Harry Wentland
Supported DCE versions: 8.0, 10.0, 11.0, 11.2 v2: rebase against 4.11 Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-07 18:19:55 +0000