summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dmub
AgeCommit message (Collapse)Author
2024-11-11drm/amd/display: 3.2.309Aric Cyr
This version brings along the following: - DML2 fixes - DP fixes - DPMS fix - HPD fixes - Misc cleanup - ODM fix - Replay fix - SPL fix Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-08drm/amd/display: Use region6 size in fw_meta_infoJinZe Xu
[Why] If driver allocated region6 size is not same as the size in firmware, dmcub won't enable region6. [How] Use region6 size in dmcub_fw_meta instead of a constant value. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: JinZe Xu <jinze.xu@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: [FW Promotion] Release 0.0.241.0Taimur Hassan
- Add DPCS health check - Update USB4 PHY SSC - Fix FAMS2 SubVP Close to VBlank changes - Create VESA Aux-based backlight control path - Fix PSR1 CRC error during CTS test Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Remove inaccessible registers from DMU diagnosticsNicholas Kazlauskas
[Why] SEC_CNTL isn't readable by x86 and can block Z8 entry if read. [How] Remove the read. Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: [FW Promotion] Release 0.0.240.0Taimur Hassan
Add some scruct for secure display. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Add a boot option to reduce phy ssc for HBR3Hansen Dsouza
[Why] Spread on DPREFCLK by 0.3 percent can have a negative effect on sink when PHY SSC is also spread by 0.3 percent [How] Add boot option for DMU to lower PHY SSC Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-15drm/amd/display: Full exit out of IPS2 when all allow signals have been clearedLeo Chen
[Why] A race condition occurs between cursor movement and vertical interrupt control thread from OS, with both threads trying to exit IPS2. Vertical interrupt control thread clears the prev driver allow signal while not fully finishing the IPS2 exit process. [How] We want to detect all the allow signals have been cleared before we perform the full exit. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Leo Chen <leo.chen@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-07drm/amd/display: Add DMUB debug offsetTaimur Hassan
Add DMUB offset for future use. Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-01drm/amd/display: [FW Promotion] Release 0.0.236.0Taimur Hassan
Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-01drm/amd/display: Add IPS residency capture helpers to dc_dmub_srvOvidiu Bunea
This enables starting and stopping IPS residency measurements and querying the IPS residency information consisting of residency percent, entry counter, total time active & inactive, and histograms for the specified IPS mode. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Restructure dpia link trainingPeichen Huang
[WHY] We intend to consolidate dp tunneling and conventional dp link training. [HOW] 1. Use the same link training entry for both dp and dpia 2. Move SET_CONFIG of non-transparent mode to dmub side 3. Add set_tps_notification dmub_cmd to notify tps request for non-transparent dpia link training 4. Check dpcd request result and abort link training early if dpia aux tunneling fails 5. Add option to avoid affect old product 6. Separately handle wait_time_microsec for dpia Reviewed-by: Cruise Hung <cruise.hung@amd.com> Reviewed-by: George Shen <george.shen@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-02drm/amd/display: 3.2.299Aric Cyr
This version brings along the following: - DCN35 fixes - DML2 fixes - IPS fixes - ODM fixes - Miscellaneous cleanups - MST fixes - SPL fixes Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-27drm/amd/display: Notify DMCUB of D0/D3 stateNicholas Kazlauskas
[Why] We want to avoid arming the HPD timer in firmware when preparing for S0i3 entry when DC is considered in D3. [How] Notify DMCUB of the power state transitions so it can decide to arm the HPD timer for idle in DCN35 only in D0. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Remove unused fields from dmub_cmd_update_dirty_rect_dataRodrigo Siqueira
Drop coasting_vtotal_high and pad from dmub_cmd_update_dirty_rect_data, since it is not used. Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-27drm/amd/display: Add logs for debugging outboxCruise
The DP tunnel AUX reply is received through Outbox1. Print the Outbox1 status if an issue occurs. Signed-off-by: Cruise <Cruise.Hung@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-23drm/amd/display: Add visual confirm for Idle StateDuncan Ma
[Why] Visual Confirm would tell us if it ever entered idle state. [How] Add debug option for IPS visual confirm Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Duncan Ma <duncan.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Add debug option for disabling SLDO optimizationsNicholas Kazlauskas
[Why] DM can hook this up to disable SLDO optimizations in firmware during DMCUB initialization for debug purposes. [How] Add the option and pass it through dmub_srv. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Add replay state entry to replay_stateAnthony Koo
- Add new Replay states 2A (initial Replay entry) and 4E (frame update) to check is there is new frame update before sending Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-19drm/amd/display: [FW Promotion] Release 0.0.222.0Anthony Koo
- Add new condition for PSR exit due to ESD recovery - Add new VB scaling feature for ABM by interpolating between existing VB parameters, allowing driver to have fine grain scaled VB levels between 0 - 250 Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: [FW Promotion] Release 0.0.221.0Anthony Koo
- Create a general command and fix Replay desync error with general cmd Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Fix missed targets in FAMS2+HWFQDillon Varone
[WHY&HOW] Add additional delay factor when considering a safe time to flip for HWFQ to be passed in by the driver. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Remove register from DCN35 DMCUB diagnostic collectionNicholas Kazlauskas
[Why] These registers should not be read from driver and triggering the security violation when DMCUB work times out and diagnostics are collected blocks Z8 entry. [How] Remove the register read from DCN35. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: define abm debug interfaceJosip Pavic
[Why & How] Define debug interface to dmub for reading back abm data. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Josip Pavic <josip.pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: [FW Promotion] Release 0.0.220.0Anthony Koo
- Change ordering of structs to put enums together - Add new define DMUB_TRACE_ENTRY_DEFINED to guard the trace code enum Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Replay low hzChunTao Tso
[Why] The original coasting vtotal is 2 bytes, and it need to be amended to 4 bytes because low hz case. [How] Amend coasting vtotal from 2 bytes to 4 bytes. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Add monitor patch skip disable crtc during psr and ips1Lewis Huang
[Why] For some panel, it cannot handle pseudo vblank set by otg resync when leave psr [How] The monitor patch will keep otg_on during enter IPS1. And then we don't need to do otg resync when wake up. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Lewis Huang <lewis.huang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Add recovery timeout to FAMS2Dillon Varone
[WHY&HOW] Add 5ms timeout to trigger recovery and force allow P-State in DMUB. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Extend PSRSU residency modeJack Chang
1. To support multiple PSRSU residency measurement mode Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Add outbox notification support for HPD redetectNicholas Kazlauskas
[Why] HPD sense changes can occur during low power states and need to be notified from firmware to driver. Upon notification the hotplug redetection routines should execute. [How] Add Support in DMUB srv and DMUB srv stat for receiving these notifications. DM can hook them up and process the HPD redetection once received. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/display: Add params of set_abm_event for VB ScalingChun-LiangChang
[Why] Add parameters for set_abm_event to enable varibright scaling. VariBright Scaling is a feature to refer to system states like 1. Power mode 2. Battery Life percent 3. FullScreen video 4. Backlight slider to adjust variBright strength to get low power or user experience. [How] Add parameters of set_abm_event for VB Scaling Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Chun-LiangChang <chuchang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-29drm/amd/display: Add new GPINT command definitionsAurabindo Pillai
New commands for enabling copy of DC bounding box values from VBIOS DMUB Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-13drm/amd/display: Read default boot optionsDuncan Ma
[WHY] DPIA boot option is set by VBIOS. It gets overwritten when driver loads DMU. [HOW] Read PreOS boot options and determine if dpia is enabled. Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Duncan Ma <duncan.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-08drm/amd/display: [FW Promotion] Release 0.0.216.0Anthony Koo
- Implement command interface to query ABM SW algorithm and HW caps. This is primarily intended as a debugging interface - Add new definitions for max number of histogram bins and ABM curve segments available in hardware - Add structures to retrieve caps to describe ABM HW caps since not all ASICs have the same number of cure segments and bins Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Notify idle link detection through shared stateNicholas Kazlauskas
[Why] We can hang in IPS2 checking DMCUB_SCRATCH0 for link detection state. [How] Replace the HW access with a check on the shared state bit. This will work the same way as the SCRATCH0 but won't require a wake in the case where link detection isn't required. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: [FW Promotion] Release 0.0.214.0Anthony Koo
- Adjust the dmub_fw_boot_options reserved bits to be correct Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amd/display: Add DCN401 dependant changes for DMCUBAurabindo Pillai
Update for DCN 4.0.1. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amd/display: Add new DCN401 sourcesAurabindo Pillai
Add initial support for DCN 4.0.1. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16drm/amd/display: Expand dmub_cmd operationsAnthony Koo
Update dmub_cmd to manipulate SDP control in replay FSM, add command for panel_cntl, expand link rate enum, and increase the reserve byte. Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16drm/amd/display: Pass sequential ONO bit to DMCUB boot optionsNicholas Kazlauskas
[Why] IPS ono sequence ordering differs based on the ASIC. [How] Detect the ASIC ID revision and set the boot option accordingly. Feed it through the DCN35 DMUB functions. Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: [FW Promotion] Release 0.0.212.0Anthony Koo
- Add boot option to change the ONO powerup flow, impacting the order of power domains to power up or down first Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Add extra DMUB logging to track message timeoutAlvin Lee
[Description] - Add logging for first DMUB inbox message that timed out to diagnostic data - It is useful to track the first failed message for debug purposes because once DMUB becomes hung (typically on a message), it will remain hung and all subsequent messages. In these cases we're interested in knowing which is the first message that failed. Reviewed-by: Josip Pavic <josip.pavic@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Add dmub additional interface support for FAMSDillon Varone
[WHY&HOW] Update dmub and driver interface for future FAMS revisions. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: [FW Promotion] Release 0.0.210.0Anthony Koo
- Add Display PHY FSM command interface for automated testing Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: Add new IPS config modeNicholas Kazlauskas
[Why] We don't have a way to specify IPS2 for display off but RCG only for static screen and local video playback. [How] Add a new setting that allows RCG only when displays are active but IPS2 when all displays are off. Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-22drm/amd/display: Enable new interface design for alternate scramblingSung Joon Kim
[why & how] To enable a new interface so alternate scrambling can be done via security module. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-22drm/amd/display: Add optional optimization for IPS handshakeNicholas Kazlauskas
[Why] It's possible to skip parts of the eval and exit sequencing if we know whether DCN is in IPS2 already or if it's committed to going to idle and not in IPS2. [How] Skip IPS2 entry/exit if DMCUB is idle but the IPS2 commit is not set. Skip the eval delay if DMCUB is already in IPS2 since we know we need to exit. These are turned off by default. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: [FW Promotion] Release 0.0.208.0Anthony Koo
- Add a Replay residency mode which only calcuates the entry time based on replay state 0/1 switch. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Update DMUB flags and definitionsAnthony Koo
[WHAT] - Update replay residency tracing design to support more types including tracking PHY and ALPM residency types - Add commands for Replay frame update count profiling - Enhance HWFQ with additional flags to allow for more optimized IPS low power state residencies - Add new flag to indicate if a new frame update needed for ABM to ramp up into steady state Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add entry and exit countersAnthony Koo
[WHY & HOW] Add new counters in the shared IPS firmware state. Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Amend coasting vtotal for replay low hzChunTao Tso
[WHY] The original coasting vtotal is 2 bytes, and it need to be amended to 4 bytes because low hz case. [HOW] Amend coasting vtotal from 2 bytes to 4 bytes. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-04-12 00:24:29 +0000