Age | Commit message (Collapse) | Author |
|
The recent conversion of show_interrupts() to seq_put_decimal_ull_width()
caused a formatting regression as it drops a previosuly existing space
separator.
Add it back by unconditionally inserting a space after the interrupt
counts and removing the extra leading space from the chip name prints.
Fixes: f9ed1f7c2e26 ("genirq/proc: Use seq_put_decimal_ull_width() for decimal values")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: David Wang <00107082@163.com>
Link: https://lore.kernel.org/all/87zfldt5g4.ffs@tglx
Closes: https://lore.kernel.org/all/4ce18851-6e9f-bbe-8319-cc5e69fb45c@linux-m68k.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Tree wide:
- Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
Core code:
- Prevent freeing an interrupt in the devres code which is not
managed by devres in the first place.
- Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
- Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which
checks whether ksoftirqd should be woken up. The latter is a
pointless exercise as both soft interrupts are raised in the
context of the timer interrupt and therefore never wake up
ksoftirqd.
- Delegate timer/hrtimer soft interrupt processing to a dedicated
thread on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
Drivers:
- New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
- Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU
cluster has its own GIC (Generic Interrupt Controller). This
requires to access the GIC of a remote cluster through a redirect
register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC
details.
- Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
- Small cleanups and fixes all over the place"
* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
irqchip/riscv-aplic: Prevent crash when MSI domain is missing
genirq/proc: Use seq_put_decimal_ull_width() for decimal values
softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
timers: Use __raise_softirq_irqoff() to raise the softirq.
hrtimer: Use __raise_softirq_irqoff() to raise the softirq
riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
irqchip: Add T-HEAD C900 ACLINT SSWI driver
dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
irqchip/mips-gic: Multi-cluster support
irqchip/mips-gic: Setup defaults in each cluster
irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
irqchip/mips-gic: Replace open coded online CPU iterations
genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
genirq/devres: Don't free interrupt which is not managed by devres
irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
irqchip/aspeed-intc: Add AST27XX INTC support
dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
...
|
|
seq_printf() is more expensive than seq_put_decimal_ull_width() due to the
format string parsing costs.
Profiling on a x86 8-core system indicates seq_printf() takes ~47% samples
of show_interrupts(). Replacing it with seq_put_decimal_ull_width() yields
almost 30% performance gain.
[ tglx: Massaged changelog and fixed up coding style ]
Signed-off-by: David Wang <00107082@163.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241108160717.9547-1-00107082@163.com
|
|
Remove hard-coded strings by using the str_enabled_disabled() helper
function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241026154029.158977-2-thorsten.blum@linux.dev
|
|
The error path in msi_domain_alloc(), frees the already allocated MSI
interrupts in a loop, but the loop condition terminates when the index
reaches zero, which fails to free the first allocated MSI interrupt at
index zero.
Check for >= 0 so that msi[0] is freed as well.
Fixes: f3cf8bb0d6c3 ("genirq: Add generic msi irq domain support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241026063639.10711-1-ruanjinjie@huawei.com
|
|
If devres_destroy() does not find a matching devres entry, then
devm_free_irq() emits a warning and tries to free the interrupt.
That's wrong as devm_free_irq() should only undo what devm_request_irq()
set up.
Replace devres_destroy() with a call to devres_release() which only invokes
the release function (free_irq()) in case that a matching devres entry was
found.
[ tglx: Massaged change log ]
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241018-devres_kernel_fix-v2-1-08918ae84982@quicinc.com
|
|
Unexport nr_irqs and declare it static now that all code that reads or
modifies nr_irqs has been converted to number_of_interrupts() /
set_number_of_interrupts(). Change the type of 'nr_irqs' from 'int' into
'unsigned int' to match the return type and argument type of the
irq_get_nr_iqs() / irq_set_nr_irqs() functions.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241015190953.1266194-23-bvanassche@acm.org
|
|
Use the irq_get_nr_irqs() function instead of the global variable
'nr_irqs'. Cache the result of this function in a local variable in
order not to rely on CSE (common subexpression elimination). Prepare
for changing 'nr_irqs' from an exported global variable into a variable
with file scope.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241015190953.1266194-22-bvanassche@acm.org
|
|
Prepare for changing 'nr_irqs' from an exported global variable into a
variable with file scope.
This will prevent accidental changes of assignments to a local variable
'nr_irqs' into assignments to the global 'nr_irqs' variable.
Suppose that a patch would be submitted for review that removes a
declaration of a local variable with the name 'nr_irqs' and that that patch
does not remove all assignments to that local variable. Such a patch
converts an assignment to a local variable into an assignment into a global
variable. If the 'nr_irqs' assignment is more than three lines away from
other changes, the assignment won't be included in the diff context lines
and hence won't be visible without inspecting the modified file.
With these abstraction series applied, such accidental conversions from
assignments to a local variable into an assignment to a global variable are
converted into a compilation error.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241015190953.1266194-2-bvanassche@acm.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Wait for device readiness after reset by polling Vendor ID and
looking for Configuration RRS instead of polling the Command
register and looking for non-error completions, to avoid hardware
retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)
- Rename CRS Completion Status to RRS ('Request Retry Status') to
match PCIe r6.0 spec usage (Bjorn Helgaas)
- Clear LBMS bit after a manual link retrain so we don't try to
retrain a link when there's no downstream device anymore (Maciej W.
Rozycki)
- Revert to the original link speed after retraining fails instead of
leaving it restricted to 2.5GT/s, so a future device has a chance
to use higher speeds (Maciej W. Rozycki)
- Wait for each level of downstream bus, not just the first, to
become accessible before restoring devices on that bus (Ilpo
Järvinen)
- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups
without having to stomp on the core's pdev->dev.groups (Lukas
Wunner)
Driver binding:
- Export pcim_request_region(), a managed counterpart of
pci_request_region(), for use by drivers (Philipp Stanner)
- Export pcim_iomap_region() and deprecate pcim_iomap_regions()
(Philipp Stanner)
- Request the PCI BAR used by xboxvideo (Philipp Stanner)
- Request and map drm/ast BARs with pcim_iomap_region() (Philipp
Stanner)
MSI:
- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a
single IRQ line and cannot set the affinity of each MSI to a
specific CPU core (Marek Vasut)
- Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl,
xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed'
warnings (Marek Vasut)
Power management:
- Add pwrctl support for ATH11K inside the WCN6855 package (Konrad
Dybcio)
PCI device hotplug:
- Remove unnecessary hpc_ops struct from shpchp (ngn)
- Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp
(weiyufeng)
Virtualization:
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS
but does provide ACS-like features (Subramanian Ananthanarayanan)
IOMMU:
- Add function 0 DMA alias quirk for Glenfly Arise audio function,
which uses the function 0 Requester ID (WangYuli)
NPEM:
- Add Native PCIe Enclosure Management (NPEM) support for sysfs
control of NVMe RAID storage indicators (ok/fail/locate/
rebuild/etc) (Mariusz Tkaczyk)
- Add support for the ACPI _DSM PCIe SSD status LED management, which
is functionally similar to NPEM but mediated by platform firmware
(Mariusz Tkaczyk)
Device trees:
- Drop minItems and maxItems from ranges in PCI generic host binding
since host bridges may have several MMIO and I/O port apertures
(Frank Li)
- Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
clocks (Krzysztof Kozlowski)
Altera PCIe controller driver:
- Convert altera DT bindings from text to YAML (Matthew Gerlach)
- Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same
thing and is what other drivers use (Jinjie Ruan)
Broadcom STB PCIe controller driver:
- Add DT binding maxItems for reset controllers (Jim Quinlan)
- Use the 'bridge' reset method if described in the DT (Jim Quinlan)
- Use the 'swinit' reset method if described in the DT (Jim Quinlan)
- Add 'has_phy' so the existence of a 'rescal' reset controller
doesn't imply software control of it (Jim Quinlan)
- Add support for many inbound DMA windows (Jim Quinlan)
- Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
families of multiple similar devices (Jim Quinlan)
- Add Broadcom 7712 DT description and driver support (Jim Quinlan)
- Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for
maintainability (Bjorn Helgaas)
Freescale i.MX6 PCIe controller driver:
- Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints
(Richard Zhu)
- Fix a code restructuring error that caused i.MX8MM and i.MX8MP
Endpoints to fail to establish link (Richard Zhu)
- Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
outbound alignment requirement (Richard Zhu)
- Call phy_power_off() in the .probe() error path (Frank Li)
- Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
supported (Frank Li)
- Manage Refclk by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Manage core reset by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Expand comments for erratum ERR010728 workaround (Frank Li)
- Use generic PHY APIs to configure mode, speed, and submode, which
is harmless for devices that implement their own internal PHY
management and don't set the generic imx_pcie->phy (Frank Li)
- Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver
Root Complex support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with
fsl,lx2160ar2-pcie (Frank Li)
- Add layerscape-pcie DT binding deprecated 'num-viewport' property
to address a DT checker warning (Frank Li)
- Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array
(Frank Li)
Loongson PCIe controller driver:
- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
(Huacai Chen)
Marvell Aardvark PCIe controller driver:
- Fix issue with emulating Configuration RRS for two-byte reads of
Vendor ID; previously it only worked for four-byte reads (Bjorn
Helgaas)
MediaTek PCIe Gen3 controller driver:
- Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC
types (Lorenzo Bianconi)
- Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)
- Add DT and driver support for Airoha EN7581 PCIe controller
(Lorenzo Bianconi)
Qualcomm PCIe controller driver:
- Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan
Ansari)
- Add back DT 'vddpe-3v3-supply', which was incorrectly removed
earlier (Johan Hovold)
- Drop endpoint redundant masking of global IRQ events (Manivannan
Sadhasivam)
- Clarify unknown global IRQ message and only log it once to avoid a
flood (Manivannan Sadhasivam)
- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
Sadhasivam)
- Assign PCI domain number for endpoint controllers (Manivannan
Sadhasivam)
- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for
endpoint controller (Manivannan Sadhasivam)
- Add global SPI interrupt for PCIe link events to DT binding
(Manivannan Sadhasivam)
- Add global RC interrupt handler to handle 'Link up' events and
automatically enumerate hot-added devices (Manivannan Sadhasivam)
- Avoid mirroring of DBI and iATU register space so it doesn't
overlap BAR MMIO space (Prudhvi Yarlagadda)
- Enable controller resources like PHY only after PERST# is
deasserted to partially avoid the problem that the endpoint SoC
crashes when accessing things when Refclk is absent (Manivannan
Sadhasivam)
- Add 16.0 GT/s equalization and RX lane margining settings (Shashank
Babu Chinta Venkata)
- Pass domain number to pci_bus_release_domain_nr() explicitly to
avoid a NULL pointer dereference (Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- Make the read-only const array 'check_addr' static (Colin Ian King)
- Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding
(Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary
handler is NULL (Siddharth Vadapalli)
- Handle IRQ request errors during root port and endpoint probe
(Siddharth Vadapalli)
TI J721E PCIe driver:
- Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable
the ACSPCIE module to drive Refclk for the Endpoint (Siddharth
Vadapalli)
- Extract the cadence link setup from cdns_pcie_host_setup() so link
setup can be done separately during resume (Thomas Richard)
- Add T_PERST_CLK_US definition for the mandatory delay between
Refclk becoming stable and PERST# being deasserted (Thomas Richard)
- Add j721e suspend and resume support (Théo Lebrun)
TI Keystone PCIe controller driver:
- Fix NULL pointer checking when applying MRRS limitation quirk for
AM65x SR 1.0 Errata #i2037 (Dan Carpenter)
Xilinx NWL PCIe controller driver:
- Fix off-by-one error in INTx IRQ handler that caused INTx
interrupts to be lost or delivered as the wrong interrupt (Sean
Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean
Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
Xilinx XDMA PCIe controller driver:
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT
binding and xilinx-dma-pl driver (Thippeswamy Havalige)
Miscellaneous:
- Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina)
- Fix minor kerneldoc issues and typos (Bjorn Helgaas)
- Use PCI_DEVID() macro in aer_inject() instead of open-coding it
(Jinjie Ruan)
- Check pcie_find_root_port() return in x86 fixups to avoid NULL
pointer dereferences (Samasth Norway Ananda)
- Make pci_bus_type constant (Kunwu Chan)
- Remove unused declarations of __pci_pme_wakeup() and
pci_vpd_release() (Yue Haibing)
- Remove any leftover .*.cmd files with make clean (zhang jiao)
- Remove unused BILLION macro (zhang jiao)"
* tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits)
PCI: Fix typos
dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
tools: PCI: Remove unused BILLION macro
tools: PCI: Remove .*.cmd files with make clean
PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
PCI: dra7xx: Fix error handling when IRQ request fails in probe
PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
PCI: qcom: Add RX lane margining settings for 16.0 GT/s
PCI: qcom: Add equalization settings for 16.0 GT/s
PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
PCI: Mark Creative Labs EMU20k2 INTx masking as broken
dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
dt-bindings: PCI: altera: msi: Convert to YAML
PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support
PCI: Rename CRS Completion Status to RRS
PCI: aardvark: Correct Configuration RRS checking
PCI: Wait for device readiness with Configuration RRS
PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place"
* tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
genirq: Use cpumask_intersects()
genirq/cpuhotplug: Use cpumask_intersects()
irqchip/apple-aic: Only access system registers on SoCs which provide them
irqchip/apple-aic: Add a new "Global fast IPIs only" feature level
irqchip/apple-aic: Skip unnecessary enabling of use_fast_ipi
dt-bindings: apple,aic: Document A7-A11 compatibles
irqdomain: Use IS_ERR_OR_NULL() in irq_domain_trim_hierarchy()
genirq/msi: Use kmemdup_array() instead of kmemdup()
genirq/proc: Change the return value for set affinity permission error
genirq/proc: Use irq_move_pending() in show_irq_affinity()
genirq/proc: Correctly set file permissions for affinity control files
genirq: Get rid of global lock in irq_do_set_affinity()
genirq: Fix typo in struct comment
irqchip/loongarch-avec: Add AVEC irqchip support
irqchip/loongson-pch-msi: Prepare get_pch_msi_handle() for AVECINTC
irqchip/loongson-eiointc: Rename CPUHP_AP_IRQ_LOONGARCH_STARTING
LoongArch: Architectural preparation for AVEC irqchip
LoongArch: Move irqchip function prototypes to irq-loongson.h
irqchip/loongson-pch-msi: Switch to MSI parent domains
softirq: Remove unused 'action' parameter from action callback
...
|
|
Replace `cpumask_any_and(a, b) >= nr_cpu_ids` and `cpumask_any_and(a, b) <
nr_cpu_ids` with the more readable `!cpumask_intersects(a, b)` and
`cpumask_intersects(a, b)`
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240906170142.1135207-1-costa.shul@redhat.com
|
|
Replace `cpumask_any_and(a, b) >= nr_cpu_ids`
with the more readable `!cpumask_intersects(a, b)`.
[ tglx: Massaged change log ]
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/all/20240904134823.777623-2-costa.shul@redhat.com
|
|
Use IS_ERR_OR_NULL() instead of open-coding a NULL and a error pointer
check.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240828122724.3697447-1-lihongbo22@huawei.com
|
|
Let kmemdup_array() take care about sizing instead of doing it open coded.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240828072219.1249250-1-ruanjinjie@huawei.com
|
|
Currently, when the affinity of an irq cannot be set due to lack of
permission, the write_irq_affinity() returns the error code -EIO.
Change the return value to -EPERM as that reflects the cause of error
correctly.
Signed-off-by: Jeff Xie <jeff.xie@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240826145805.5938-1-jeff.xie@linux.dev
|
|
irq_move_pending() encapsulates irqd_is_setaffinity_pending() depending on
CONFIG_GENERIC_PENDING_IRQ.
Replace the open coded #ifdeffery with it.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240829111522.230595-1-ruanjinjie@huawei.com
|
|
The kernel already knows at the time of interrupt allocation whether
affinity of an interrupt can be controlled by userspace or not.
It still creates all related procfs control files with read/write
permissions. That's inconsistent and non-intuitive for system
administrators and tools.
Therefore set the file permissions to read-only for such interrupts.
[ tglx: Massage change log, fixed UP build ]
Signed-off-by: Jeff Xie <jeff.xie@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240825131911.107119-1-jeff.xie@linux.dev
|
|
Kunkun Jiang reports that for a workload involving the simultaneous startup
of a large number of VMs (for a total of about 200 vcpus), a lot of CPU
time gets spent on spinning on the tmp_mask_lock that exists as a static
raw spinlock in irq_do_set_affinity(). This lock protects a global cpumask
(tmp_mask) that is used as a temporary variable to compute the resulting
affinity.
While this is triggered by KVM issuing a irq_set_affinity() call each time
a vcpu is about to execute, it is obvious that having a single global
resource is not very scalable.
Since a cpumask can be a fairly large structure on systems with a high core
count, a stack allocation is not really appropriate. Instead, turn the
global cpumask into a per-CPU variable, removing the need for locking
altogether as the code is executed with preemption and interrupts disabled.
[ tglx: Moved the per CPU variable declaration outside of the function ]
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kunkun Jiang <jiangkunkun@huawei.com>
Link: https://lore.kernel.org/all/20240826080618.3886694-1-maz@kernel.org
Link: https://lore.kernel.org/all/a7fc58e4-64c2-77fc-c1dc-f5eb78dbbb01@huawei.com
|
|
The unification of irq_domain_create_legacy() missed the fact that
interrupts must be associated even when the Linux interrupt number provided
in the first_irq argument is 0.
This breaks all call sites of irq_domain_create_legacy() which supply 0 as
the first_irq argument.
Enforce the association for legacy domains in __irq_domain_instantiate() to
cure this.
[ tglx: Massaged it slightly. ]
Fixes: 70114e7f7585 ("irqdomain: Simplify simple and legacy domain creation")
Reported-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://lore.kernel.org/all/c3379142-10bc-4f14-b8ac-a46927aeac38@gmail.com
|
|
When the domain suffix is not supplied alloc_fwnode_name() unconditionally
adds a separator.
Fix the format strings to get rid of the stray '-' separator.
Fixes: 1e7c05292531 ("irqdomain: Allow giving name suffix for domain")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240812193101.1266625-3-andriy.shevchenko@linux.intel.com
|
|
The code uses if (bus_token) and if (bus_token == DOMAIN_BUS_ANY).
Since bus_token is an enum, the latter is more robust against changes.
Convert all !bus_token checks to explicitely check for DOMAIN_BUS_ANY.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240812193101.1266625-2-andriy.shevchenko@linux.intel.com
|
|
Merge the irqdomain changes which are required for regmap to apply
depending patches and therefore tagged.
|
|
Devices can provide multiple interrupt lines. One reason for this is that
a device has multiple subfunctions, each providing its own interrupt line.
Another reason is that a device can be designed to be used (also) on a
system where some of the interrupts can be routed to another processor.
A line often further acts as a demultiplex for specific interrupts
and has it's respective set of interrupt (status, mask, ack, ...)
registers.
Regmap supports the handling of these registers and demultiplexing
interrupts, but the interrupt domain code ends up assigning the same name
for the per interrupt line domains. This causes a naming collision in the
debugFS code and leads to confusion, as /proc/interrupts shows two separate
interrupts with the same domain name and hardware interrupt number.
Instead of adding a workaround in regmap or driver code, allow giving a
name suffix for the domain name when the domain is created.
Add a name_suffix field in the irq_domain_info structure and make
irq_domain_instantiate() use this suffix if it is given when a domain is
created.
[ tglx: Adopt it to the cleanup patch and fixup the invalid NULL return ]
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/871q2yvk5x.ffs@tglx
|
|
irq_domain_set_name() is truly unreadable gunk. Clean it up before adding
more.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/all/874j7uvkbm.ffs@tglx
|
|
irq_domain_create_simple() and irq_domain_create_legacy() use
__irq_domain_instantiate(), but have extra handling of allocating interrupt
descriptors and associating interrupts in them. Some of that is duplicated.
There are also call sites which have conditonals to invoke different
interrupt domain creator functions, where one of them is usually
irq_domain_create_legacy(). Alternatively they associate the interrupts for
the legacy case after creating the domain.
Moving the extra logic of irq_domain_create_simple()/legacy() into
__irq_domain_instantiate() allows to consolidate that.
Introduce hwirq_base and virq_base members in the irq_domain_info
structure, which allows to transport the required information and add the
conditional interrupt descriptor allocation and interrupt association into
__irq_domain_instantiate().
This reduces irq_domain_create_legacy() and irq_domain_create_simple() to
trivial wrappers which fill in the info structure and allows call sites
which must support the legacy case along with more modern mechanism to
select the domain type via the parameters of the info struct.
[ tglx: Massaged change log ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/32d07bd79eb2b5416e24da9e9e8fe5955423dcf9.1723120028.git.mazziesaccount@gmail.com
|
|
Since commit 337cbeb2c13e ("genirq/irq_sim: Simplify the API"),
irq_sim_work_ctx::irq_base is unused. Drop it.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/all/20240808104118.430670-1-jirislaby@kernel.org
|
|
Currently, whenever a caller is providing an affinity hint for an
interrupt, the allocation code uses it to calculate the node and copies the
cpumask into irq_desc::affinity.
If the affinity for the interrupt is not marked 'managed' then the startup
of the interrupt ignores irq_desc::affinity and uses the system default
affinity mask.
Prevent this by setting the IRQD_AFFINITY_SET flag for the interrupt in the
allocator, which causes irq_setup_affinity() to use irq_desc::affinity on
interrupt startup if the mask contains an online CPU.
[ tglx: Massaged changelog ]
Fixes: 45ddcecbfa94 ("genirq: Use affinity hint in irqdesc allocation")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20240806072044.837827-1-shayd@nvidia.com
|
|
Various PCI controllers that mux MSIs onto a single IRQ line produce these
"IRQ%d: set affinity failed" warnings when entering suspend. This has been
discussed before [1] [2] and an example test case is included at the end of
this commit message.
Controller drivers that create MSI IRQ domain with
MSI_FLAG_USE_DEF_CHIP_OPS and do not override the .irq_set_affinity()
irqchip callback get assigned the default msi_domain_set_affinity()
callback. That is not desired on controllers where it is not possible to
set affinity of each MSI IRQ line to a specific CPU core due to hardware
limitation.
Introduce flag MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset
if the controller driver did not assign it. This way, migrate_one_irq()
can exit right away, without printing the warning. The .irq_set_affinity()
implementations which only return -EINVAL can be removed from multiple
controller drivers.
$ grep 25 /proc/interrupts
25: 0 0 0 0 0 0 0 0 PCIe MSI 0 Edge PCIe PME
$ echo core > /sys/power/pm_test ; echo mem > /sys/power/state
...
Disabling non-boot CPUs ...
IRQ25: set affinity failed(-22). <---------- This is being silenced here
psci: CPU7 killed (polled 4 ms)
...
[1] https://lore.kernel.org/all/d4a6eea3c5e33a3a4056885419df95a7@kernel.org/
[2] https://lore.kernel.org/all/5f4947b18bf381615a37aa81c2242477@kernel.org/
Link: https://lore.kernel.org/r/20240723132958.41320-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI interrupt updates from Thomas Gleixner:
"Switch ARM/ARM64 over to the modern per device MSI domains.
This simplifies the handling of platform MSI and wire to MSI
controllers and removes about 500 lines of legacy code.
Aside of that it paves the way for ARM/ARM64 to utilize the dynamic
allocation of PCI/MSI interrupts and to support the upcoming non
standard IMS (Interrupt Message Store) mechanism on PCIe devices"
* tag 'irq-msi-2024-07-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/gic-v3-its: Correctly fish out the DID for platform MSI
irqchip/gic-v3-its: Correctly honor the RID remapping
genirq/msi: Move msi_device_data to core
genirq/msi: Remove platform MSI leftovers
irqchip/irq-mvebu-icu: Remove platform MSI leftovers
irqchip/irq-mvebu-sei: Switch to MSI parent
irqchip/mvebu-odmi: Switch to parent MSI
irqchip/mvebu-gicp: Switch to MSI parent
irqchip/irq-mvebu-icu: Prepare for real per device MSI
irqchip/imx-mu-msi: Switch to MSI parent
irqchip/gic-v2m: Switch to device MSI
irqchip/gic_v3_mbi: Switch over to parent domain
genirq/msi: Remove platform_msi_create_device_domain()
irqchip/mbigen: Remove platform_msi_create_device_domain() fallback
irqchip/gic-v3-its: Switch platform MSI to MSI parent
irqchip/irq-msi-lib: Prepare for DOMAIN_BUS_WIRED_TO_MSI
irqchip/mbigen: Prepare for real per device MSI
irqchip/irq-msi-lib: Prepare for DEVICE MSI to replace platform MSI
irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X]
irqchip/irq-msi-lib: Prepare for PCI MSI/MSIX
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core:
- Provide a new mechanism to create interrupt domains. The existing
interfaces have already too many parameters and it's a pain to
expand any of this for new required functionality.
The new function takes a pointer to a data structure as argument.
The data structure combines all existing parameters and allows for
easy extension.
The first extension for this is to handle the instantiation of
generic interrupt chips at the core level and to allow drivers to
provide extra init/exit callbacks.
This is necessary to do the full interrupt chip initialization
before the new domain is published, so that concurrent usage sites
won't see a half initialized interrupt domain. Similar problems
exist on teardown.
This has turned out to be a real problem due to the deferred and
parallel probing which was added in recent years.
Handling this at the core level allows to remove quite some accrued
boilerplate code in existing drivers and avoids horrible
workarounds at the driver level.
- The usual small improvements all over the place
Drivers:
- Add support for LAN966x OIC and RZ/Five SoC
- Split the STM ExtI driver into a microcontroller and a SMP version
to allow building the latter as a module for multi-platform
kernels
- Enable MSI support for Armada 370XP on platforms which do not
support IPIs
- The usual small fixes and enhancements all over the place"
* tag 'irq-core-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
irqdomain: Fix the kernel-doc and plug it into Documentation
genirq: Set IRQF_COND_ONESHOT in request_irq()
irqchip/imx-irqsteer: Handle runtime power management correctly
irqchip/gic-v3: Pass #redistributor-regions to gic_of_setup_kvm_info()
irqchip/bcm2835: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v4: Make sure a VPE is locked when VMAPP is issued
irqchip/gic-v4: Substitute vmovp_lock for a per-VM lock
irqchip/gic-v4: Always configure affinity on VPE activation
Revert "irqchip/dw-apb-ictl: Support building as module"
Revert "Loongarch: Support loongarch avec"
arm64: Kconfig: Allow build irq-stm32mp-exti driver as module
ARM: stm32: Allow build irq-stm32mp-exti driver as module
irqchip/stm32mp-exti: Allow building as module
irqchip/stm32mp-exti: Rename internal symbols
irqchip/stm32-exti: Split MCU and MPU code
arm64: Kconfig: Select STM32MP_EXTI on STM32 platforms
ARM: stm32: Use different EXTI driver on ARMv7m and ARMv7a
irqchip/stm32-exti: Add CONFIG_STM32MP_EXTI
irqchip/dw-apb-ictl: Support building as module
irqchip/riscv-aplic: Simplify the initialization code
...
|
|
Now that the platform MSI hack is gone, nothing needs to know about struct
msi_device_data outside of the core code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142236.003295177@linutronix.de
|
|
No more users!
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240623142235.943295676@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
- Intel PT support enhancements & fixes
- Fix leaked SIGTRAP events
- Improve and fix the Intel uncore driver
- Add support for Intel HBM and CXL uncore counters
- Add Intel Lake and Arrow Lake support
- AMD uncore driver fixes
- Make SIGTRAP and __perf_pending_irq() work on RT
- Micro-optimizations
- Misc cleanups and fixes
* tag 'perf-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
perf/x86/intel: Add a distinct name for Granite Rapids
perf/x86/intel/ds: Fix non 0 retire latency on Raptorlake
perf/x86/intel: Hide Topdown metrics events if the feature is not enumerated
perf/x86/intel/uncore: Fix the bits of the CHA extended umask for SPR
perf: Split __perf_pending_irq() out of perf_pending_irq()
perf: Don't disable preemption in perf_pending_task().
perf: Move swevent_htable::recursion into task_struct.
perf: Shrink the size of the recursion counter.
perf: Enqueue SIGTRAP always via task_work.
task_work: Add TWA_NMI_CURRENT as an additional notify mode.
perf: Move irq_work_queue() where the event is prepared.
perf: Fix event leak upon exec and file release
perf: Fix event leak upon exit
task_work: Introduce task_work_cancel() again
task_work: s/task_work_cancel()/task_work_cancel_func()/
perf/x86/amd/uncore: Fix DF and UMC domain identification
perf/x86/amd/uncore: Avoid PMU registration if counters are unavailable
perf/x86/intel: Support Perfmon MSRs aliasing
perf/x86/intel: Support PERFEVTSEL extension
perf/x86: Add config_mask to represent EVENTSEL bitmask
...
|
|
A proper task_work_cancel() API that actually cancels a callback and not
*any* callback pointing to a given function is going to be needed for
perf events event freeing. Do the appropriate rename to prepare for
that.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240621091601.18227-2-frederic@kernel.org
|
|
Currently users of the interrupt simulator don't have any way of being
notified about interrupts from the simulated domain being requested or
released. This causes a problem for one of the users - the GPIO
simulator - which is unable to lock the pins as interrupts.
Define a structure containing callbacks to be executed on various
irq_sim-related events (for now: irq request and release) and provide an
extended function for creating simulated interrupt domains that takes it
and a pointer to custom user data (to be passed to said callbacks) as
arguments.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240624093934.17089-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Modify the comment formatting in irq_find_matching_fwspec function to
enhance code readability and maintain consistency.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614102403.13610-2-shivamurthy.shastri@linutronix.de
|
|
__irq_domain_add() has been replaced by irq_domain_instanciate() and so,
it is no more used.
Simply remove it.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-21-herve.codina@bootlin.com
|
|
Domain creation functions use __irq_domain_add(). With the introduction
of irq_domain_instantiate(), __irq_domain_add() becomes obsolete.
In order to fully remove __irq_domain_add(), convert domain
creation function to irq_domain_instantiate()
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-19-herve.codina@bootlin.com
|
|
Add a devres version of irq_domain_instantiate().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-17-herve.codina@bootlin.com
|
|
The current API functions create an irq_domain and also publish this
newly created to domain. Once an irq_domain is published, consumers can
request IRQ in order to use them.
Some interrupt controller drivers have to perform some more operations
with the created irq_domain in order to have it ready to be used.
For instance:
- Allocate generic irq chips with irq_alloc_domain_generic_chips()
- Retrieve the generic irq chips with irq_get_domain_generic_chip()
- Initialize retrieved chips: set register base address and offsets,
set several hooks such as irq_mask, irq_unmask, ...
With the newly introduced irq_domain_alloc_generic_chips(), an interrupt
controller driver can use the irq_domain_chip_generic_info structure and
set the init() hook to perform its generic chips initialization.
In order to avoid a window where the domain is published but not yet
ready to be used, handle the generic chip creation (i.e the
irq_domain_alloc_generic_chips() call) before the domain is published.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-16-herve.codina@bootlin.com
|
|
Most of generic chip drivers need to perform some more additional
initializations on the generic chips allocated before they can be fully
ready.
These additional initializations need to be performed before the IRQ
domain is published to avoid a race condition between IRQ consumers and
suppliers.
Introduce the init() hook to perform these initializations at the right
place just after the generic chip creation. Also introduce the exit() hook
to allow reverting operations done by the init() hook just before the
generic chip is destroyed.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-15-herve.codina@bootlin.com
|
|
The existing __irq_alloc_domain_generic_chips() uses a bunch of parameters
to describe the generic chips that need to be allocated.
Adding more parameters and wrappers to hide new parameters in the existing
code leads to more and more code without any relevant values and without
any flexibility.
Introduce irq_domain_alloc_generic_chips() where the generic chips
description is done using the irq_domain_chip_generic_info structure
instead of the bunch of parameters to allow flexibility and easy evolution.
Also introduce irq_domain_remove_generic_chips() to revert the operations
done by irq_domain_alloc_generic_chips().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-14-herve.codina@bootlin.com
|
|
The current API does not allow additional initialization before the
domain is published. This can lead to a race condition between consumers
and supplier as a domain can be available for consumers before being
fully ready.
Introduce the init() hook to allow additional initialization before
plublishing the domain. Also introduce the exit() hook to revert
operations done in init() on domain removal.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-13-herve.codina@bootlin.com
|
|
irq_domain_update_bus_token() is the only way to set the domain bus
token. This is sub-optimal as irq_domain_update_bus_token() can be called
only once the domain is created and needs to revert some operations, change
the domain name and redo the operations.
In order to avoid this revert/change/redo sequence, take the domain bus
into account token during the domain creation.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-12-herve.codina@bootlin.com
|
|
__irq_domain_create() can fail for several reasons. When it fails it
returns a NULL pointer and so filters out the exact failure reason.
The only user of __irq_domain_create() is irq_domain_instantiate() which
can return a PTR_ERR value. On __irq_domain_create() failure, it uses an
arbitrary error code.
Rather than using this arbitrary error value, make __irq_domain_create()
return is own error code and use that one.
[ tglx: Remove the pointless ERR_CAST. domain is a valid return pointer ]
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-11-herve.codina@bootlin.com
|
|
irq_domain_instantiate() handles all needs to be used in
irq_domain_create_hierarchy()
Avoid code duplication and use directly irq_domain_instantiate() for
hierarchy domain creation.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-10-herve.codina@bootlin.com
|
|
To use irq_domain_instantiate() from irq_domain_create_hierarchy(),
irq_domain_instantiate() needs to handle the domain hierarchy parent.
Add the required functionality.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-9-herve.codina@bootlin.com
|
|
In order to use irq_domain_instantiate() from several places such as
irq_domain_create_hierarchy(), irq_domain_instantiate() needs to handle
additional domain flags.
Add the required infrastructure.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-8-herve.codina@bootlin.com
|
|
The existing __irq_domain_create() use a bunch of parameters to create
an irq domain.
With the introduction of irq_domain_info structure, these parameters are
available in the information structure itself.
Using directly this information structure allows future flexibility to
add other parameters in a simple way without the need to change the
__irq_domain_create() prototype.
Convert __irq_domain_create() to use the information structure.
[ tglx: Fixup struct initializer ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240614173232.1184015-7-herve.codina@bootlin.com
|