summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dmub/src
AgeCommit message (Collapse)Author
2024-11-08drm/amd/display: Use region6 size in fw_meta_infoJinZe Xu
[Why] If driver allocated region6 size is not same as the size in firmware, dmcub won't enable region6. [How] Use region6 size in dmcub_fw_meta instead of a constant value. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: JinZe Xu <jinze.xu@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-11-04drm/amd/display: Remove inaccessible registers from DMU diagnosticsNicholas Kazlauskas
[Why] SEC_CNTL isn't readable by x86 and can block Z8 entry if read. [How] Remove the read. Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-10-28drm/amd/display: Add a boot option to reduce phy ssc for HBR3Hansen Dsouza
[Why] Spread on DPREFCLK by 0.3 percent can have a negative effect on sink when PHY SSC is also spread by 0.3 percent [How] Add boot option for DMU to lower PHY SSC Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-09-18drm/amd/display: Restructure dpia link trainingPeichen Huang
[WHY] We intend to consolidate dp tunneling and conventional dp link training. [HOW] 1. Use the same link training entry for both dp and dpia 2. Move SET_CONFIG of non-transparent mode to dmub side 3. Add set_tps_notification dmub_cmd to notify tps request for non-transparent dpia link training 4. Check dpcd request result and abort link training early if dpia aux tunneling fails 5. Add option to avoid affect old product 6. Separately handle wait_time_microsec for dpia Reviewed-by: Cruise Hung <cruise.hung@amd.com> Reviewed-by: George Shen <george.shen@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-27drm/amd/display: Add logs for debugging outboxCruise
The DP tunnel AUX reply is received through Outbox1. Print the Outbox1 status if an issue occurs. Signed-off-by: Cruise <Cruise.Hung@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-07-01drm/amd/display: Add debug option for disabling SLDO optimizationsNicholas Kazlauskas
[Why] DM can hook this up to disable SLDO optimizations in firmware during DMCUB initialization for debug purposes. [How] Add the option and pass it through dmub_srv. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Signed-off-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Remove register from DCN35 DMCUB diagnostic collectionNicholas Kazlauskas
[Why] These registers should not be read from driver and triggering the security violation when DMCUB work times out and diagnostics are collected blocks Z8 entry. [How] Remove the register read from DCN35. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Add outbox notification support for HPD redetectNicholas Kazlauskas
[Why] HPD sense changes can occur during low power states and need to be notified from firmware to driver. Upon notification the hotplug redetection routines should execute. [How] Add Support in DMUB srv and DMUB srv stat for receiving these notifications. DM can hook them up and process the HPD redetection once received. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-05-13drm/amd/display: Read default boot optionsDuncan Ma
[WHY] DPIA boot option is set by VBIOS. It gets overwritten when driver loads DMU. [HOW] Read PreOS boot options and determine if dpia is enabled. Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Duncan Ma <duncan.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-30drm/amd/display: Notify idle link detection through shared stateNicholas Kazlauskas
[Why] We can hang in IPS2 checking DMCUB_SCRATCH0 for link detection state. [How] Replace the HW access with a check on the shared state bit. This will work the same way as the SCRATCH0 but won't require a wake in the case where link detection isn't required. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amd/display: Add DCN401 dependant changes for DMCUBAurabindo Pillai
Update for DCN 4.0.1. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amd/display: Add new DCN401 sourcesAurabindo Pillai
Add initial support for DCN 4.0.1. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16drm/amd/display: Pass sequential ONO bit to DMCUB boot optionsNicholas Kazlauskas
[Why] IPS ono sequence ordering differs based on the ASIC. [How] Detect the ASIC ID revision and set the boot option accordingly. Feed it through the DCN35 DMUB functions. Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Add extra DMUB logging to track message timeoutAlvin Lee
[Description] - Add logging for first DMUB inbox message that timed out to diagnostic data - It is useful to track the first failed message for debug purposes because once DMUB becomes hung (typically on a message), it will remain hung and all subsequent messages. In these cases we're interested in knowing which is the first message that failed. Reviewed-by: Josip Pavic <josip.pavic@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amd/display: add DMUB source files and changes for DCN351Hamza Mahfooz
DMUB support is required to light-up displays. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22drm/amd/display: Fix S4 hang polling on HW power up done for VBIOS DMCUBNicholas Kazlauskas
[Why] VBIOS DMCUB firmware doesn't set the dal_fw bit and we end up hanging waiting for HW power up done because of it. [How] Simplify the path and allow mailbox_rdy to be a functional check when we detect VBIOS firmware. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-14drm/amd/display: Add shared firmware state for DMUB IPS handshakeNicholas Kazlauskas
[Why] Read modify write hazards can occur when using a single shared scratch register between driver and firmware leading to driver accessing DCN in IPS2 and a system hang. [How] Add infrastructure for using REGION6 as a shared firmware state between driver and firmware. This region is uncachable. Replace the existing get/set idle calls with reads/writes to the (volatile) shared firmware state blocks that a separated by at least a cache line between firmware and driver. Remove the workarounds that required rewriting/checking read modify write hazards. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amd/display: Drop legacy codeRodrigo Siqueira
Display code keeps getting improvements, and because of that, some legacy code is left behind. This commit drops some of those unused codes. Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: Wait for mailbox ready when powering up DMCUBNicholas Kazlauskas
[Why] Otherwise we can send commands too early and they don't execute until the next command is sent. [How] Check the extra status bit when polling for HW powered up. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-22drm/amd/display: Add GART memory support for dmcubFudongwang
[Why] In dump file, GART memory can be accessed while frame buffer cannot. [How] Add GART memory support for dmcub. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Fudongwang <fudong.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-19drm/amd/display: skip error logging when DMUB is inactive from S3Samson Tam
[Why] On resume from S3, while DMUB is inactive, DMUB queue and execute calls will not work. Skip reporting errors in these scenarios [How] Add new return code during DMUB queue and execute calls when DMUB is in S3 state. Skip logging errors in these scenarios Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-15drm/amd/display: do not send commands to DMUB if DMUB is inactive from S3Samson Tam
[Why] On resume from S3, may get apply_idle_optimizations call while DMUB is inactive which will just time out. [How] Set and track power state in dmub_srv and check power state before sending commands to DMUB. Add interface in both dmub_srv and dc_dmub_srv Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-06drm/amd/display: Increase scratch buffer sizeJosip Pavic
[Why] Larger data blocks are expected to be transferred between driver and FW in the future. [How] Embiggen the scratch buffer to a cromulent size. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Josip Pavic <josip.pavic@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amd/display: Include udelay when waiting for INBOX0 ACKAlvin Lee
When waiting for the ACK for INBOX0 message, we have to ensure to include the udelay for proper wait time Cc: stable@vger.kernel.org # 6.1+ Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amd/display: Change the DMCUB mailbox memory location from FB to inboxLewis Huang
[WHY] Flush command sent to DMCUB spends more time for execution on a dGPU than on an APU. This causes cursor lag when using high refresh rate mouses. [HOW] 1. Change the DMCUB mailbox memory location from FB to inbox. 2. Only change windows memory to inbox. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Lewis Huang <lewis.huang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-17drm/amd/display: Guard against invalid RPTR/WPTR being setNicholas Kazlauskas
[WHY] HW can return invalid values on register read, guard against these being set and causing us to access memory out of range and page fault. [HOW] Guard at sync_inbox1 and guard at pushing commands. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-26drm/amd/display: Add a check for idle power optimizationSung Joon Kim
[why] Need a helper function to check idle power is allowed so that dc doesn't access any registers that are power-gated. [how] Implement helper function to check idle power optimization. Enable a hook to check if detection is allowed. V2: Add function hooks for set and get idle states. Check if function hook was properly initialized. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Nicholas Choi <nicholas.choi@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Sung Joon Kim <sungkim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-26drm/amd/display: Add missing copyright notice in DMUBStylon Wang
[Why & How] Add missing/incomplete copyright notice in DMUB files Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-09drm/amd/display: Revert "drm/amd/display: Add a check for idle power ↵Sung Joon Kim
optimization" Revert commit 434cf7af492f ("drm/amd/display: Add a check for idle power optimization") Because it cause Freesync and S4 regression Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Sung Joon Kim <sungkim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-10-04drm/amd/display: Add a check for idle power optimizationSung Joon Kim
[why] Need a helper function to check idle power is allowed so that dc doesn't access any registers that are power-gated. [how] Implement helper function to check idle power optimization. Enable a hook to check if detection is allowed. Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-06drm/amd/display: clean up one inconsistent indentingYang Li
drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_srv.c:355 dmub_srv_hw_setup() warn: inconsistent indenting Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Add DCN35 DMUBQingqing Zhuo
[Why & How] Add DMUB handling for DCN35. Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Skip dmub memory flush when not neededDillon Varone
[WHY&HOW] Readback is only necessary when loaded via CPU. Reviewed-by: Chris Park <chris.park@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Write flip addr to scratch reg for subvpAlvin Lee
[Description] SubVP needs to "calculate" the earliest in use META address by using the current primary / meta addresses, but this leads to a race condition where FW and driver can read/write the address at the same time and intermittently produce inconsistent address offsets. To mitigate this issue without locking (too slow), save each surface flip addr into scratch registers and use this to keep track of the earliest in use META addres. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Enable runtime register offset init for DCN32 DMUBAurabindo Pillai
[Why&How] DMUB subsystem was continuing to use compile time offset calculation for register access. Switch this to runtime calculation to stay consistent with rest of DC code. To enable this, an additional interface init_reg_offsets() are added to DMUB's hw_funcs struct. Asics with runtime register offset calculation enabled shall populate this hook with a fn pointer that will invoke the necessary macros to calculate the offset. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/display: Add interface to modify DMUB panel power optionsPaul Hsieh
[Why] This option can vary depending on the panel and may be required to be called during sink detection phase before transmitter control. [How] Allow modify the bit depending on the eDP panel connected with a new interface. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Add helpers to get DMUB FW boot optionsCruise Hung
[Why & How] To query the bits and print them out for debug purposes. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Cruise Hung <cruise.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amd/display: Skip enabling DMCUB when using emulationTaimur Hassan
[Why & How] Shouldn't be touching path for HW DMCUB when emulating. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alan Liu <haoping.liu@amd.com> Signed-off-by: Taimur Hassan <syed.hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-30drm/amd/display: Set minimum requirement for using PSR-SU on PhoenixMario Limonciello
The same parade TCON issue can potentially happen on Phoenix, and the same PSR resilience changes have been ported into the DMUB firmware. Don't allow running PSR-SU unless on the newer firmware. Cc: stable@vger.kernel.org Cc: Sean Wang <sean.ns.wang@amd.com> Cc: Marc Rossi <Marc.Rossi@amd.com> Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-30drm/amd/display: Set minimum requirement for using PSR-SU on RembrandtMario Limonciello
A number of parade TCONs are causing system hangs when utilized with older DMUB firmware and PSR-SU. Some changes have been introduced into DMUB firmware to add resilience against these failures. Don't allow running PSR-SU unless on the newer firmware. Cc: stable@vger.kernel.org Cc: Sean Wang <sean.ns.wang@amd.com> Cc: Marc Rossi <Marc.Rossi@amd.com> Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2443 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09Revert "drm/amd/display: cache trace buffer size"Leo Ma
Revert commit 257e9891db0b ("drm/amd/display: cache trace buffer size") to fix regression found in tests. Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: cache trace buffer sizeJosip Pavic
[Why & How] Cache the trace buffer size retrieved from DMUB FW in the driver Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Josip Pavic <josip.pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/display: Update correct DCN314 register headerCruise Hung
[Why] The register header for DCN314 is not correct. [How] Update correct DCN314 register header. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Cruise Hung <cruise.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-24drm/amd/display: Add p-state debuggingSung Lee
[WHY] P-State related issues are fairly common but currently there is no way to debug these issues after the fact. [HOW] Add helpful registers to HW state queries Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Sung Lee <sunglee@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-24drm/amd/display: Restore rptr/wptr for DMCUB as workaroundJinZe.Xu
[Why] States may be desync after resume. [How] Sync sw state with hw state. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-21drm/amd/display: Do not clear GPINT register when releasing DMUB from resetAurabindo Pillai
[Why & How] There's no need to clear GPINT register for DMUB when releasing it from reset. Fix that. Fixes: ac2e555e0a7f ("drm/amd/display: Add DMCUB source files and changes for DCN32/321") Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-21drm/amd/display: Reset OUTBOX0 r/w pointer on DMUB resetCruise Hung
[Why & How] We missed resetting OUTBOX0 mailbox r/w pointer on DMUB reset. Fix it. Fixes: 6ecf9773a503 ("drm/amd/display: Fix DMUB outbox trace in S4 (#4465)") Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-20drm/amd/display: Clear GPINT1 before taking DMCUB out of resetSamson Tam
[Why] Workaround for DMCUB front door load [How] Clear GPINT after reset so its consistent Signed-off-by: Samson Tam <Samson.Tam@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amd/display: add mechanism to skip DCN initEric Yang
[Why] If optimized init is done in FW. DCN init can be skipped in driver. This need to be communicated between driver and fw and maintain backwards compatibility. [How] Use DMUB scratch 0 bit 2 to indicate optimized init done in fw and use DMUB scatch 4 bit 0 to indicate drive supports the optimized flow so FW will perform it. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Reset DMUB mailbox SW state after HW resetNicholas Kazlauskas
[Why] Otherwise we can be out of sync with what's in the hardware, leading to us rerunning every command that's presently in the ringbuffer. [How] Reset software state for the mailboxes in hw_reset callback. This is already done as part of the mailbox init in hw_init, but we do need to remember to reset the last cached wptr value as well here. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-04-12 06:34:31 +0000